Know the Right Steps in Installing a Deadbolt Lock As long as deadbolt lock is concerned, to opt to just have it installed yourself is a given and when this happens, you will want to make sure that you will have it done accordingly, which is what we will be talking about in this article to help you out. Right off the bat, you will want to check the manufacturer’s template because most of the manufacturers of deadbolt locks have a template for you to follow. These templates will then have everything you need as long as installation is concerned because the contents will then have markings that are accurately designed for whatever thickness the door has so that the installation of deadbolt locks will be done appropriately. Once you have the marker in place, make sure that you will then cut a hole as per the markings that you had with the use of the template along. Keep in mind that you will have to opt for the right tools as well and using a hole saw for such task will most likely be the best equipment for the purpose. Depending on the thickness of the door will be how you should be cutting the door so when you get to see that the pilot bit goes through the opposite side, make sure that you will then approach and continue on the other side in order for you to avoid the need to worry about splinters. For you to effectively drill a hole right through the edge of the door, a 1 1/2 ” spade bit should do the trick.
Overwhelmed by the Complexity of Deadbolts? This May Help
Keep in mind that you will also have to dry-fit the bolt right into the hole that you have drilled and make sure that you will include the trace around the faceplate as well. So that you will be able to mortise the surrounding area, make sure that you will use chisel as this is the only tool that should fit perfectly for such purpose as the moment. A good tip that you should know about is to make sure that you will tap the tool deep enough to recede the faceplate and use a smaller chisel to do the rounded corners efficiently.
Overwhelmed by the Complexity of Deadbolts? This May Help
Use the right tool to bolt the area to the door securely. To have the thumb lever and the cylinder plate installed is what should come after next. A good way for you to ensure that everything fits perfectly is if you are to dry-fit them respectively. Set the interior piece accordingly and align the screw holes respectively as well so you will then have the chance to mount the holes inside. Using a paint or anything that could represent a mark, accurately mark the end of the bolt and close the door. Once closed, make sure that you will turn the deadbolt a couple of times and use a space bit to drill two overlapping holes in the doorframe for the deadbolt. The strike plate should be screwed accordingly once you have mortised the area.

Finding Similarities Between Locks and Life